One of the most challenging and rewarding aspects of Linux administration is the iptables firewall. To the unenlightened, this can be a confusing black box that breaks your web server and blocks your favorite visitors from viewing your content at the most inconvenient times. This blog is the first in a series aimed at clarifying this otherwise mysterious force at work in your server.
Nothing compares with the frustration of trying to make a program listen on a different port – like if you wanted to configure your mail client to listen on port 2525. Many times, configuring a program the hard way (some would say the “correct” way) using configuration files may not be worth your time and effort … Especially if the server is running on a control panel that does not natively support this functionality.
Fortunately, iptables offers an elegant solution:
iptables -t nat -A PREROUTING -p tcp --dport 2525 -j REDIRECT --to-ports 25
What this does:
- This specifies
-t natto indicate the nat table. Typically rules are added to the “filter” table (if you do not specify another table), and this is where the majority of the traffic is handled. In this case, however, we require the use of the nat table.
- This rules appends (
-A), which means to add the rule at the bottom of the list.
- This rule is added to the
- For the tcp protocol (
- The destination port (
2525– this is the port that the client is trying to access on your server.
- The traffic is jumped (
-j) to the
REDIRECTaction. This is the action that is taken when the rule matches.
- The port is redirected to port
25on the server.
As you can see, by changing the protocol to either
udp or by adjusting the
dport number and the
to-ports number, you can redirect any port incoming to any listening port on the server. Just remember that the
dport is the port the client machine is trying to connect to (the port they configure in the mail client, for example).
But check this out: Say for example you have a website (shocking, I know). You don’t have a load balancer or a firewall set up, but you want to split off your email traffic to a second server to reduce strain on your web server. Essentially, you want to take incoming port 25 and redirect it … to ANOTHER SERVER. With iptables, you can make this work:
iptables -t nat -A PREROUTING -p tcp -d 220.127.116.11 --dport 25 -j DNAT --to-destination 10.10.10.10:25
What this does:
- It specifies a destination (
-d) IP address. This is not needed, but if you want to limit the email redirection to a single address, this is how you can do it.
- It is jumped to
DNAT, which stands for destination nat.
- The destination and port are specified as arguments on
As you can see, this forwards all traffic on port 25 to an internal IP address.
Now, say you want to redirect from a different incoming port to a port on another server:
iptables -t nat -A PREROUTING -p tcp --dport 5001 -j DNAT --to-destination 10.10.10.10:25
iptables -t nat -A POSTROUTING -p tcp --dport 25 -j MASQUERADE
In this example, the incoming port is different, so we need to change it back to the standard port on the way back out through the primary server.
If you would like further reading on this topic, I recommend this great tutorial:
Remember, when you are modifying your running configuration of iptables, you will still need to save your changes in order for it to persist on reboot. Be sure to test your configuration before saving it with “
service iptables save” so that you don’t lock yourself out.